Issue 2, 2019

Nanoparticle aggregation in a freshwater river: the role of engineered surface coatings

Abstract

Within aquatic environments, the aggregation of ENPs has been identified as an important process affecting their environmental fate. Previous research using simple model mediums has demonstrated that engineered surface coatings applied to ENPs can alter their aggregation behavior. However, the relevance and effect of these surface coatings on ENPs dispersed in complex aquatic mediums is largely unknown. The objective of the current work was to explore this topic further using gold nanoparticles (AuNPs) with different engineered surface coatings as model ENPs. AuNPs with neutral or negatively-charged, covalently-bound surface coatings (polyethylene glycol [PEG] or carboxylated PEG, respectively) were found to be stable in both raw and filtered river water, while AuNPs with positively-charged (branched polyethylenimine, aminated PEG) or electrostatically-bound (citrate) surface coatings readily aggregated. For the model ENPs that aggregated, their average percent removal after mixing in the filtered river water was similar to that measured after the same period in raw river water, revealing that homoaggregation was dominant relative to heteroaggregation. To quantify the effect of the surface coatings on the colloidal stability of the model ENPs, we attempted to estimate homo- and heteroaggregation attachment efficiency factors (αhomo and αhetero, respectively) using a recently reported functional assay. A number of challenges preventing these direct calculations in this system are discussed. However, from modelling it was inferred that αhomoαhetero. We find that ENP colloidal stability was related to eco-corona formation (i.e., adsorption of natural organic matter), which was regulated by the properties of the engineered surface coatings. Overall, the results of the batch experiments demonstrate that engineered surface coatings can affect ENP colloidal stability in a complex medium, further highlighting the need to consider this factor when investigating the environmental fate of ENPs.

Graphical abstract: Nanoparticle aggregation in a freshwater river: the role of engineered surface coatings

Supplementary files

Article information

Article type
Paper
Submitted
13 Sep 2018
Accepted
20 Dec 2018
First published
28 Dec 2018

Environ. Sci.: Nano, 2019,6, 540-553

Author version available

Nanoparticle aggregation in a freshwater river: the role of engineered surface coatings

M. C. Surette and J. A. Nason, Environ. Sci.: Nano, 2019, 6, 540 DOI: 10.1039/C8EN01021H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements