Issue 2, 2019

A cabbage leaf like nanostructure of a NiS@ZnS composite on Ni foam with excellent electrochemical performance for supercapacitors

Abstract

In the present study, a NiS@ZnS composite nanostructure was synthesized on a nickel foam substrate by a facile chemical bath deposition (CBD) method. The prepared composites were analyzed by X-ray photoelectron spectroscopy, high resolution transmission electron microscopy, and field emission scanning electron microscopy. The electrochemical performance of the supercapacitor (SC) electrodes was examined by cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy. The NiS@ZnS composite exhibited a cabbage leaf like nanostructure and showed outstanding electrochemical performance in SCs with a specific capacitance of 1533.0 F g−1 at a current density of 7.5 A g−1, good cycling stability with 97.9% retention over 3000 cycles, greater energy density, and excellent rate capability compared to the bare NiS (1279.83 F g−1) and ZnS (616.66 F g−1)-based electrodes in SCs. The facile, novel synthesis method, outstanding performance, well defined surface morphology, synergetic effect and low cost make the NiS@ZnS composite an ideal electrode material for electrochemical energy storage devices.

Graphical abstract: A cabbage leaf like nanostructure of a NiS@ZnS composite on Ni foam with excellent electrochemical performance for supercapacitors

Supplementary files

Article information

Article type
Paper
Submitted
16 Oct 2018
Accepted
27 Nov 2018
First published
28 Nov 2018

Dalton Trans., 2019,48, 578-586

A cabbage leaf like nanostructure of a NiS@ZnS composite on Ni foam with excellent electrochemical performance for supercapacitors

K. D. Ikkurthi, S. Srinivasa Rao, J. Ahn, C. D. Sunesh and H. Kim, Dalton Trans., 2019, 48, 578 DOI: 10.1039/C8DT04139C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements