In this study, layered JDF-L1 zeolites with Si/Ti ratios down to 2.0 were in situ synthesized by using transition metal dichalcogenides as metal precursors. Employment of layered TiS2 as metal precursors led to unprecedented wide range of Si/Ti ratios and effective suppression of the formation of TiO2 impure phase.
The article was received on 05 Oct 2019, accepted on 25 Nov 2019 and first published on 26 Nov 2019
If you are not the author of this article and you wish to reproduce material from it in a third party non-RSC publication you must formally request permission using Copyright Clearance Center. Go to our Instructions for using Copyright Clearance Center page for details.
Authors contributing to RSC publications (journal articles, books or book chapters) do not need to formally request permission to reproduce material contained in this article provided that the correct acknowledgement is given with the reproduced material.
Reproduced material should be attributed as follows:
If the material has been adapted instead of reproduced from the original RSC publication "Reproduced from" can be substituted with "Adapted from".
In all cases the Ref. XX is the XXth reference in the list of references.
If you are the author of this article you do not need to formally request permission to reproduce figures, diagrams etc. contained in this article in third party publications or in a thesis or dissertation provided that the correct acknowledgement is given with the reproduced material.
Reproduced material should be attributed as follows:
If you are the author of this article you still need to obtain permission to reproduce the whole article in a third party publication with the exception of reproduction of the whole article in a thesis or dissertation.
Information about reproducing material from RSC articles with different licences is available on our Permission Requests page.
Please wait while we load your content...
