Issue 3, 2019

Green synthesis of fluorescent carbon dots as an effective fluorescence probe for morin detection

Abstract

In this article, a green, simple and economic method based on microwave treatment of glycine and urea was developed to synthesize water-soluble carbon dots (CDs) with strong fluorescence. The obtained CDs were characterized by transmission electron microscopy (TEM), UV-vis absorption spectroscopy, fluorescence spectroscopy, Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The results indicate that the as-synthesized CDs have an average diameter of 3.2 nm and exhibit excitation-dependent emission behavior. The surface of the CDs is rich in amine, amide, hydroxyl and carboxyl groups, which endow the CDs with strong fluorescence and good water solubility. We found that the as-synthesized CDs can be used as an effective fluorescence probe for morin detection based on the fluorescence quenching of CDs. The linear range for morin detection is 0.4–60 μM with a limit of detection (LOD) of 0.12 μM. The CD-based fluorescence sensor shows good selectivity and sensitivity toward morin sensing. Finally, the proposed sensing method was successfully applied to detect morin in human urine samples with recoveries of 97.7–104%.

Graphical abstract: Green synthesis of fluorescent carbon dots as an effective fluorescence probe for morin detection

Supplementary files

Article information

Article type
Paper
Submitted
30 Oct 2018
Accepted
03 Dec 2018
First published
07 Dec 2018

Anal. Methods, 2019,11, 353-358

Green synthesis of fluorescent carbon dots as an effective fluorescence probe for morin detection

L. Liu, Z. Mi, Q. Hu, C. Li, X. Li and F. Feng, Anal. Methods, 2019, 11, 353 DOI: 10.1039/C8AY02361A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements