Jump to main content
Jump to site search

Issue 48, 2018
Previous Article Next Article

Cross-linked poly(hydroxy imide) gate-insulating materials for low-temperature processing of organic thin-film transistors

Author affiliations

Abstract

A polymeric insulating material cured at the low temperature of 130 °C through the thermal cross-linking reaction of poly(hydroxy imide) (PHI) and 2,2′-bis(4-(2-(vinyloxy)ethoxy)phenyl)propane (BPA-DEVE) was characterized to determine its applicability in organic thin-film transistors (OTFTs) on plastic substrates. Thin films of cross-linked PHI showed smooth surfaces and exhibited high breakdown voltages exceeding 3 MV cm−1 and low dependences of capacitance on frequency. Pentacene and polymer semiconductor-based TFTs were fabricated employing this gate insulator on polyethylene naphthalate substrates. The pentacene-based TFT achieved the mobility of 0.13 cm2 V−1 s−1 without hysteresis, and TFTs fabricated by the solution processing of the polymer semiconductor also exhibited negligible hysteresis and gate leakage currents below 0.1 nA. These electrically stable characteristics can be attributed to the formation of intramolecular hydrogen bonds in PHI which impeded the effect of moisture-induced slow polarization.

Graphical abstract: Cross-linked poly(hydroxy imide) gate-insulating materials for low-temperature processing of organic thin-film transistors

Back to tab navigation

Supplementary files

Publication details

The article was received on 29 May 2018, accepted on 25 Nov 2018 and first published on 05 Dec 2018


Article type: Paper
DOI: 10.1039/C8TC02634C
Citation: J. Mater. Chem. C, 2018,6, 13359-13366
  •   Request permissions

    Cross-linked poly(hydroxy imide) gate-insulating materials for low-temperature processing of organic thin-film transistors

    J. Kim, J. W. Kim, E. K. Lee, J. Park, B. Lee, Y. Kwon, S. Byun, M. Jung and J. Kim, J. Mater. Chem. C, 2018, 6, 13359
    DOI: 10.1039/C8TC02634C

Search articles by author

Spotlight

Advertisements