Issue 41, 2018

Viscous friction of squeezed bubbly liquid layers

Abstract

Shear viscosity of bubbly liquids is known to depend on both the gas volume fraction and the capillary number. Here, we study the impact of confinement on their behavior by investigating the viscosity of semi-dilute bubbly liquid layers confined between two plates and characterized by a ratio of the undeformed bubble diameter to the layer thickness equal to or larger than unity. For all the studied confinement ratios, viscosity is shown to be smaller than the viscosity of the suspending liquid for capillary numbers larger than 0.1. Measurements of bubble deformations show that this behavior is related to bubble stretching in the direction of shear induced flow. In the limit of high capillary numbers, viscosity reaches values predicted for unconfined bubbly liquids. On the other hand, our results for smaller capillary numbers, i.e. within the range 0.001–0.1, reveal a non-monotonic variation of the viscosity as a function of the confinement ratio, exhibiting a well-defined maximum value for the ratio close to 1.8. This behavior differs strongly from the reference case of unconfined bubbly liquid, and it is shown to result from both bulk and wall drag forces on the squeezed bubbles.

Graphical abstract: Viscous friction of squeezed bubbly liquid layers

Article information

Article type
Paper
Submitted
29 Jun 2018
Accepted
25 Sep 2018
First published
26 Sep 2018

Soft Matter, 2018,14, 8372-8377

Viscous friction of squeezed bubbly liquid layers

R. Morini, X. Chateau, G. Ovarlez, O. Pitois and L. Tocquer, Soft Matter, 2018, 14, 8372 DOI: 10.1039/C8SM01335G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements