Issue 63, 2017

Synthesis and properties of an intrinsic flame retardant silicone rubber containing phosphaphenanthrene structure

Abstract

A novel intrinsic flame retardant silicone rubber (SR) containing phosphaphenanthrene structure was synthesized in the present research. A series of characterizations including vertical burning testing, limiting oxygen index (LOI), microscale combustion calorimetry (MCC), thermogravimetric (TG) analysis and scanning electronic microscopy (SEM) showed that this SR possessed much quicker self-extinguishment, lower heat release rate, higher LOI and thermal stability as well as better charring capacity compared with unmodified SR. The char residues of the materials had been investigated in detail by Fourier transform infrared spectra (FT-IR) and X-ray photoelectron spectroscopy (XPS) to reveal the interactions between phosphaphenanthrene group and siloxane in the condensed phase. In addition, the corresponding physical properties such as transparence, dynamic and static mechanical performances were also evaluated.

Graphical abstract: Synthesis and properties of an intrinsic flame retardant silicone rubber containing phosphaphenanthrene structure

Article information

Article type
Paper
Submitted
19 Jun 2017
Accepted
08 Aug 2017
First published
15 Aug 2017
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2017,7, 39786-39795

Synthesis and properties of an intrinsic flame retardant silicone rubber containing phosphaphenanthrene structure

W. Chen, Y. Liu, C. Xu, Y. Liu and Q. Wang, RSC Adv., 2017, 7, 39786 DOI: 10.1039/C7RA06798D

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements