Issue 16, 2016

A few-layered Ti3C2 nanosheet/glass fiber composite separator as a lithium polysulphide reservoir for high-performance lithium–sulfur batteries

Abstract

We report in this work a new type composite separator that contains a conductive few-layered Ti3C2 nanosheet and a glass fiber (GF) membrane for lithium–sulfur (Li–S) batteries. Using commercial bulk S (particle size 2–10 μm) as the cathode directly, the Li–S battery delivers an initial discharge capacity of 820 mA h g−1 at a current density of 0.5 A g−1 and a discharge capacity of 721 mA h g−1 after 100 cycles.

Graphical abstract: A few-layered Ti3C2 nanosheet/glass fiber composite separator as a lithium polysulphide reservoir for high-performance lithium–sulfur batteries

Supplementary files

Article information

Article type
Paper
Submitted
16 Dec 2015
Accepted
21 Mar 2016
First published
21 Mar 2016

J. Mater. Chem. A, 2016,4, 5993-5998

A few-layered Ti3C2 nanosheet/glass fiber composite separator as a lithium polysulphide reservoir for high-performance lithium–sulfur batteries

C. Lin, W. Zhang, L. Wang, Z. Wang, W. Zhao, W. Duan, Z. Zhao, B. Liu and J. Jin, J. Mater. Chem. A, 2016, 4, 5993 DOI: 10.1039/C5TA10307J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements