Issue 111, 2016

Investigation of the effect of VOx/ZrO2 structure on the catalytic activity in cyclohexene epoxidation

Abstract

Vanadium oxide catalysts were prepared by impregnation of ammonium metavanadate on monoclinic zirconia with a metal loading equal to 5 wt%. Further thermal treatment led to V2O5/ZrO2 upon calcination at 400 °C and VO2/ZrO2 upon calcination at 400 °C, followed by reduction at the same temperature. The third compound underwent further heat treatment at 800 °C, under argon. The effect of high temperature treatment on the structure of the materials as well as on the catalytic properties of the vanadate species was investigated in the epoxidation of cyclohexene, with TBHP as the oxidant and heptane as the solvent. Structural characterization of these materials was carried out using ICP-OES, X-ray diffraction (XRD), N2 adsorption–desorption at 77 K, UV-Vis diffuse reflectance spectroscopy (DR UV-Vis), Fourier-Transform Infrared Spectroscopy (FTIR) and pyridine adsorption followed by FTIR. The coexistence of a solid solution with polymeric vanadium species in the case of 5VZr-2 and 5VZr-3 with the formation of ZrV2O7 in the case of 5VZr-3, resulted in good catalytic performance, with up to 80% epoxide selectivity and 32% cyclohexene conversion. In the case of 5VZr-1, the appearance of the crystalline V2O5 phase decreased the catalytic activity in the cyclohexene reaction.

Graphical abstract: Investigation of the effect of VOx/ZrO2 structure on the catalytic activity in cyclohexene epoxidation

Article information

Article type
Paper
Submitted
11 Aug 2016
Accepted
12 Nov 2016
First published
21 Nov 2016

RSC Adv., 2016,6, 110375-110382

Investigation of the effect of VOx/ZrO2 structure on the catalytic activity in cyclohexene epoxidation

S. El-Korso, S. Bedrane, A. Choukchou-Braham and R. Bachir, RSC Adv., 2016, 6, 110375 DOI: 10.1039/C6RA20251A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements