Jump to main content
Jump to site search
PLANNED MAINTENANCE Close the message box

Scheduled maintenance work on Wednesday 21st October 2020 from 07:00 AM to 07:00 PM (BST).

During this time our website performance may be temporarily affected. We apologise for any inconvenience this might cause and thank you for your patience.


Issue 34, 2016, Issue in Progress
Previous Article Next Article

A novel approach to obtain conductive tracks on PP/MWCNT nanocomposites by laser printing

Author affiliations

Abstract

This article aims to develop metal free conductive tracks on polymer nanocomposites based on a polypropylene matrix in the presence of MWCNTs, by using laser printing. The main purpose is to obtain electrical wiring that can replace the metal wires commonly used for electrical transmission. A complete investigation is carried out in order to study the effect of the laser processing on the polymer matrix and the influence of the MWCNTs on the electrical and thermal properties of the polymer-based nanocomposites. The paper also describes the effect of the laser on the final microstructure of the CNTs-based nanocomposites. The results obtained clearly indicate that the laser printing is a simple, flexible, and relatively low cost approach to obtain conductive tracks on PP in the presence of MWCNTs, depending on the laser parameters set up. In fact, as found, it is strictly necessary to reach a good compromise between the electrical resistance values and the final integrity of the samples, because the laser printing treatment can induce damage on the final material because of the high energy absorbed on the polymer surface and the high temperatures generated. A circuit prototype has been also designed and developed.

Graphical abstract: A novel approach to obtain conductive tracks on PP/MWCNT nanocomposites by laser printing

Back to tab navigation

Supplementary files

Article information


Submitted
29 Jan 2016
Accepted
07 Mar 2016
First published
10 Mar 2016

RSC Adv., 2016,6, 28522-28531
Article type
Paper

A novel approach to obtain conductive tracks on PP/MWCNT nanocomposites by laser printing

G. Colucci, C. Beltrame, M. Giorcelli, A. Veca and C. Badini, RSC Adv., 2016, 6, 28522
DOI: 10.1039/C6RA02726A

Social activity

Search articles by author

Spotlight

Advertisements