Issue 38, 2016

Pulsed laser assisted growth of aligned nanowires of WO3: role of interface with substrate

Abstract

We report here a systematic study of the growth of aligned WO3 (002)-oriented nanowires (NWs) on a (111)-oriented platinised silicon substrate using a pulsed laser deposition (PLD) method. Transmission electron microscopy (TEM) analysis has shown that the wires are single crystalline and grow along the [001]t or [100]t directions. X-ray diffraction (XRD) measurements confirm phase and structural analysis. We investigated the effect of ablated particle flux on nanowire growth, in particular, the role of the nucleating centre at the interface as it gets modified by the ablated particle flux. We observe a critical value of the laser energy (that determines a critical flux and energy of ablated moieties) at which a compact nanograin film gets converted to an aligned nanowire film. We attribute the existence of such a threshold to the desorption process from the catalyst droplet. By cross-sectional TEM and compositional mapping accompanied by simulation, we confirm that the interfacial layer between the substrate and NW is modified by the ablated particle flux and energy. Aligned NWs above the threshold energy can be attributed to the formation of favorable nucleation sites for a preferred orientation.

Graphical abstract: Pulsed laser assisted growth of aligned nanowires of WO3: role of interface with substrate

Article information

Article type
Paper
Submitted
23 Dec 2015
Accepted
21 Mar 2016
First published
24 Mar 2016

RSC Adv., 2016,6, 31705-31716

Pulsed laser assisted growth of aligned nanowires of WO3: role of interface with substrate

A. Ghatak, S. Roy Moulik and B. Ghosh, RSC Adv., 2016, 6, 31705 DOI: 10.1039/C5RA27542C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements