Issue 13, 2016

Advanced three dimensional characterization of silica-based ultraporous materials

Abstract

Whatever the field of application (building, transportation, packaging, etc.) energy losses must be reduced to meet the government target of a 40% cut in CO2 emissions. This leads to a challenge for materials scientists: designing materials with thermal conductivities lower than 0.015 W m−1 K−1 under ambient conditions. Such a low value requires reducing air molecule mobility in highly porous materials, and silica-based superinsulation materials (SIM) made of packed nanostructured silica or aerogel are good candidates for this purpose. However, the native nanostructure of silica has never been imaged or characterized up to now, making SIM optimization quite difficult. In this paper, three nanostructured commercial silica samples prepared by different synthesis methods were analysed and quantified using advanced electron tomography, N2 physisorption, mercury porosimetry and helium pycnometry. It was demonstrated that 3D images yield a much finer description of the microstructure (particle, aggregate and pore) compared to global measurements. For the samples studied, silica particle size is dependent on the synthesis method, increasing with pore diameter size. The smallest silica particles were obtained by the sol–gel method which also provides the smallest pore diameters, the smallest and rather spherical aggregates, and the lowest thermal conductivity. The pyrogenic and precipitated samples studied presented bigger silica particles with higher pore diameters and thus higher thermal conductivities. 3D image driven characterization opens up new synthesis opportunities for silica.

Graphical abstract: Advanced three dimensional characterization of silica-based ultraporous materials

Supplementary files

Article information

Article type
Paper
Submitted
06 Dec 2015
Accepted
15 Jan 2016
First published
18 Jan 2016

RSC Adv., 2016,6, 10625-10632

Author version available

Advanced three dimensional characterization of silica-based ultraporous materials

L. Roiban, G. Foray, Q. Rong, A. Perret, D. Ihiawakrim, K. Masenelli-Varlot, E. Maire and B. Yrieix, RSC Adv., 2016, 6, 10625 DOI: 10.1039/C5RA26014K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements