Jump to main content
Jump to site search

Issue 14, 2016
Previous Article Next Article

Flexible Hall sensors based on graphene

Author affiliations


The excellent electronic and mechanical properties of graphene provide a perfect basis for high performance flexible electronic and sensor devices. Here, we present the fabrication and characterization of flexible graphene based Hall sensors. The Hall sensors are fabricated on 50 μm thick flexible Kapton foil using large scale graphene grown by chemical vapor deposition technique on copper foil. Voltage and current normalized sensitivities of up to 0.096 V VT−1 and 79 V AT−1 were measured, respectively. These values are comparable to the sensitivity of rigid silicon based Hall sensors and are the highest values reported so far for any flexible Hall sensor devices. The sensitivity of the Hall sensor shows no degradation after being bent to a minimum radius of 4 mm, which corresponds to a tensile strain of 0.6%, and after 1000 bending cycles to a radius of 5 mm.

Graphical abstract: Flexible Hall sensors based on graphene

Back to tab navigation

Publication details

The article was received on 08 Dec 2015, accepted on 14 Mar 2016 and first published on 15 Mar 2016

Article type: Paper
DOI: 10.1039/C5NR08729E
Citation: Nanoscale, 2016,8, 7683-7687

  •   Request permissions

    Flexible Hall sensors based on graphene

    Z. Wang, M. Shaygan, M. Otto, D. Schall and D. Neumaier, Nanoscale, 2016, 8, 7683
    DOI: 10.1039/C5NR08729E

Search articles by author