Jump to main content
Jump to site search

Issue 13, 2016
Previous Article Next Article

Self-assembled SnO2 micro- and nanosphere-based gas sensor thick films from an alkoxide-derived high purity aqueous colloid precursor

Author affiliations

Abstract

Tin oxide is considered to be one of the most promising semiconductor oxide materials for use as a gas sensor. However, a simple route for the controllable build-up of nanostructured, sufficiently pure and hierarchical SnO2 structures for gas sensor applications is still a challenge. In the current work, an aqueous SnO2 nanoparticulate precursor sol, which is free of organic contaminants and sorbed ions and is fully stable over time, was prepared in a highly reproducible manner from an alkoxide Sn(OR)4 just by mixing it with a large excess of pure neutral water. The precursor is formed as a separate liquid phase. The structure and purity of the precursor is revealed using XRD, SAXS, EXAFS, HRTEM imaging, FTIR, and XRF analysis. An unconventional approach for the estimation of the particle size based on the quantification of the Sn–Sn contacts in the structure was developed using EXAFS spectroscopy and verified using HRTEM. To construct sensors with a hierarchical 3D structure, we employed an unusual emulsification technique not involving any additives or surfactants, using simply the extraction of the liquid phase, water, with the help of dry butanol under ambient conditions. The originally generated crystalline but yet highly reactive nanoparticles form relatively uniform spheres through self-assembly and solidify instantly. The spheres floating in butanol were left to deposit on the surface of quartz plates bearing sputtered gold electrodes, producing ready-for-use gas sensors in the form of ca. 50 μm thick sphere-based-films. The films were dried for 24 h and calcined at 300 °C in air before use. The gas sensitivity of the structures was tested in the temperature range of 150–400 °C. The materials showed a very quickly emerging and reversible (20–30 times) increase in electrical conductivity as a response to exposure to air containing 100 ppm of H2 or CO and short (10 s) recovery times when the gas flow was stopped.

Graphical abstract: Self-assembled SnO2 micro- and nanosphere-based gas sensor thick films from an alkoxide-derived high purity aqueous colloid precursor

Back to tab navigation

Supplementary files

Publication details

The article was received on 11 Nov 2015, accepted on 25 Feb 2016 and first published on 26 Feb 2016


Article type: Paper
DOI: 10.1039/C5NR07942J
Author version
available:
Download author version (PDF)
Nanoscale, 2016,8, 7056-7067

  •   Request permissions

    Self-assembled SnO2 micro- and nanosphere-based gas sensor thick films from an alkoxide-derived high purity aqueous colloid precursor

    G. Kelp, T. Tätte, S. Pikker, H. Mändar, A. G. Rozhin, P. Rauwel, A. S. Vanetsev, A. Gerst, M. Merisalu, U. Mäeorg, M. Natali, I. Persson and V. G. Kessler, Nanoscale, 2016, 8, 7056
    DOI: 10.1039/C5NR07942J

Search articles by author

Spotlight

Advertisements