Issue 48, 2015

Pseudo-Hall effect in single crystal 3C-SiC(111) four-terminal devices

Abstract

This article reports the first results on the strain-induced pseudo-Hall effect in single crystal 3C-SiC(111) four-terminal devices. The impact of crystal orientation and the direction of strain on this effect has been presented. A single crystal p-type 3C-SiC(111) was grown by low pressure chemical vapor deposition and four-terminal devices were fabricated using conventional photolithography and dry etching processes. It has been observed that the pseudo-Hall effect in p-type 3C-SiC(111) is the same in [110] and [11[2 with combining macron]] crystal orientations and is smaller than the pseudo-Hall effect of 3C-SiC(100) four-terminal devices due to the defects associated with the growth of 3C-SiC(111).

Graphical abstract: Pseudo-Hall effect in single crystal 3C-SiC(111) four-terminal devices

Article information

Article type
Communication
Submitted
18 Sep 2015
Accepted
18 Nov 2015
First published
19 Nov 2015

J. Mater. Chem. C, 2015,3, 12394-12398

Pseudo-Hall effect in single crystal 3C-SiC(111) four-terminal devices

A. Qamar, D. V. Dao, J. Han, H. Phan, A. Younis, P. Tanner, T. Dinh, L. Wang and S. Dimitrijev, J. Mater. Chem. C, 2015, 3, 12394 DOI: 10.1039/C5TC02984H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements