Jump to main content
Jump to site search

Issue 44, 2015
Previous Article Next Article

Prevention of surface-induced thrombogenesis on poly(vinyl chloride)

Author affiliations


Much biomedical equipment consisting of or containing plastic polymer(s) must come into contact with blood – an interaction that, at the molecular level, may unfortunately prompt biological processes with potentially deleterious, short- or long-term effects such as thrombosis. In the present investigation, this problem is alleviated for poly(vinyl chloride) (PVC) through chemical surface modification with an ultrathin, monoethylene glycol-based coating – a transformation that is characterized using X-ray photoelectron spectroscopy (XPS) supplemented by contact angle goniometry (CAG). Antithrombogenic properties are assessed through calculation (for the first 10 min, and after 60 min) of the surface coverage percentage due to platelet adhesion, aggregation and thrombus formation upon continuous exposure to fluorescently-labelled whole human blood. At all shear rates investigated (300, 900, and 1500 s−1), surface coverage decreases by >99% with respect to bare PVC (10 min, short-term contact with blood). Most importantly, antithrombogenic performance is retained for longer-term exposure experiments (60 min), regardless of applied shear rate as well.

Graphical abstract: Prevention of surface-induced thrombogenesis on poly(vinyl chloride)

Back to tab navigation

Supplementary files

Publication details

The article was received on 04 Aug 2015, accepted on 01 Sep 2015 and first published on 08 Sep 2015

Article type: Paper
DOI: 10.1039/C5TB01582K
J. Mater. Chem. B, 2015,3, 8623-8628

  •   Request permissions

    Prevention of surface-induced thrombogenesis on poly(vinyl chloride)

    K. Fedorov, A. Jankowski, S. Sheikh, C. Blaszykowski, A. Reheman, A. Romaschin, H. Ni and M. Thompson, J. Mater. Chem. B, 2015, 3, 8623
    DOI: 10.1039/C5TB01582K

Search articles by author