Issue 115, 2015

Homogeneous vertical ZnO nanorod arrays with high conductivity on an in situ Gd nanolayer

Abstract

We demonstrate a novel, one-step, catalyst-free method for the production of size-controlled vertical highly conductive ZnO nanorod (NR) arrays with highly desirable characteristics by pulsed laser deposition using a Gd-doped ZnO target. Our study shows that an in situ transparent and conductive Gd nanolayer (with a uniform thickness of ∼1 nm) at the interface between a lattice-matched (11−20) a-sapphire substrate and ZnO is formed during the deposition. This nanolayer significantly induces a relaxation mechanism that controls the dislocation distribution along the growth direction; which consequently improves the formation of homogeneous vertically aligned ZnO NRs. We demonstrate that both the lattice orientation of the substrate and the Gd characteristics are important in enhancing the NR synthesis, and we report precise control of the NR density by changing the oxygen partial pressure. We show that these NRs possess high optical and electrical quality, with a mobility of 177 cm2 (V s)−1, which is comparable to the best-reported mobility of ZnO NRs. Therefore, this new and simple method has significant potential for improving the performance of materials used in a wide range of electronic and optoelectronic applications.

Graphical abstract: Homogeneous vertical ZnO nanorod arrays with high conductivity on an in situ Gd nanolayer

Supplementary files

Article information

Article type
Paper
Submitted
24 Sep 2015
Accepted
28 Oct 2015
First published
30 Oct 2015

RSC Adv., 2015,5, 94670-94678

Author version available

Homogeneous vertical ZnO nanorod arrays with high conductivity on an in situ Gd nanolayer

T. H. Flemban, V. Singaravelu, A. A. Sasikala Devi and I. S. Roqan, RSC Adv., 2015, 5, 94670 DOI: 10.1039/C5RA19798H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements