Issue 63, 2015

Structural and dielectric anomalies near the MPB region of Na0.5Bi0.5TiO3–SrTiO3 solid solution

Abstract

In the present attempt, (1 − x)NBT(Na0.5Bi0.5TiO3)–xST(SrTiO3) (x = 0.24–0.28) solid solutions are studied near the MPB region to investigate short-range structural and dielectric anomalies. X-ray diffraction study confirms the presence of MPB by the co-existence of rhombohedral (202), (122) and pseudocubic (002), (112) peaks at x = 0.25–0.26. For x = 0.24, the absence of pseudocubic peaks indicate the complete diffusion of cubic ST phase into the rhombohedral phase of pure NBT. RAMAN spectra exhibit the appearance of new vibrational modes at A and B sites by the splitting of bands in the NBT–ST at the MPB (x = 0.25–0.26), which are not detected for x < 0.25 and x > 0.26. This can be assigned to local ordering at the A-site cations (Bi/Na/Sr) and B-site TiO6 octahedral distortion, respectively. The high-temperature RAMAN spectra confirm the structural stability at up to 550 °C of all NBT–ST samples near the MPB. Dielectric transition temperature is shifted from 360 °C to 160 °C with ST and shows a single broad anomaly. The broadening of the dielectric peak with deviation from Curie–Weiss law proves the dielectric dispersion near the MPB region of NBT–ST. The MPB origin is the outcome of local imbalance due to chemical inhomogeneity at the A site and short-range disordering at the B site. This induces strain-charge disparity, which influences dielectric behavior.

Graphical abstract: Structural and dielectric anomalies near the MPB region of Na0.5Bi0.5TiO3–SrTiO3 solid solution

Article information

Article type
Paper
Submitted
30 Mar 2015
Accepted
19 May 2015
First published
19 May 2015

RSC Adv., 2015,5, 50644-50654

Author version available

Structural and dielectric anomalies near the MPB region of Na0.5Bi0.5TiO3–SrTiO3 solid solution

S. Sayyed, S. A. Acharya, P. Kautkar and V. Sathe, RSC Adv., 2015, 5, 50644 DOI: 10.1039/C5RA05617A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements