Issue 35, 2014

Effect of thermal annealing on active layer morphology and performance for small molecule bulk heterojunction organic solar cells

Abstract

New molecule design and device optimization are two of the main strategies used to obtain high performance organic photovoltaics. In this paper, bulk heterojunction solar cell devices using a newly designed solution-processable small molecule (DRDTSBDTT) were systematically investigated for their JV behavior and the morphology of the active layer under different annealing treatments to understand the impact of thermal annealing on open circuit voltage, short circuit current and fill factor. A strong relationship was found between thermal annealing and these factors. JV behavior analysis indicates that this is because of the efficiency change of the fundamental exciton diffusion, charge separation and collection steps, which is supported by morphology studies for the active layer under different thermal treatments. The results show that for optimized performance of a given molecule, the morphology and phase control are the most important factors to achieve intrinsic best performance. With these, the power conversion efficiency was increased from 3.36% to 5.05% under optimized annealing treatment for DRDTSBDTT-based devices.

Graphical abstract: Effect of thermal annealing on active layer morphology and performance for small molecule bulk heterojunction organic solar cells

Supplementary files

Article information

Article type
Paper
Submitted
13 May 2014
Accepted
04 Jul 2014
First published
10 Jul 2014

J. Mater. Chem. C, 2014,2, 7247-7255

Author version available

Effect of thermal annealing on active layer morphology and performance for small molecule bulk heterojunction organic solar cells

Z. Yi, W. Ni, Q. Zhang, M. Li, B. Kan, X. Wan and Y. Chen, J. Mater. Chem. C, 2014, 2, 7247 DOI: 10.1039/C4TC00994K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements