Issue 41, 2014

Supercapacitive properties of coiled carbon nanotubes directly grown on nickel nanowires

Abstract

In this paper, Coiled carbon nanotubes (CNTs) have been grown directly on an anodized aluminum oxide (AAO) template by using catalytic chemical vapor deposition (CVD). The nanochannels of the AAO template, which is covered on one side with a conducting Au layer, were filled by using Catalytic Ni nanowires (Ni-NWs). Scanning electron microscopy (SEM/EDX) and Raman spectroscopy were used to prove the formation of coiled CNTs on Ni-NWs. Cyclic voltammetry, galvanostatic charge–discharge, and impedance spectroscopy were used to investigate the capacitive behavior of the coiled CNT/Ni-NW. Electrochemical analysis revealed that as electrodes for supercapacitors the coiled CNT/NW porous structured materials exhibit a high specific capacitance (202 F g−1 at a current density of 10 A g−1) as well as excellent cycle stability and can retain more than 92% of the initial response after 6000 cycles. On the other hand as prepared coiled CNT/Ni-NW electrode worked over a wide potential window (2.1 V) in 1 M Na2SO4 aqueous solution at room temperature. Combining the specific capacitance with the large electrochemical window ensures the superior energy and power densities of nanostructure electrodes, which would be useful to improve the performance of new energy storage technologies.

Graphical abstract: Supercapacitive properties of coiled carbon nanotubes directly grown on nickel nanowires

Supplementary files

Article information

Article type
Paper
Submitted
14 Jun 2014
Accepted
26 Aug 2014
First published
27 Aug 2014

J. Mater. Chem. A, 2014,2, 17446-17453

Author version available

Supercapacitive properties of coiled carbon nanotubes directly grown on nickel nanowires

F. Hekmat, B. Sohrabi, M. S. Rahmanifar and M. R. Vaezi, J. Mater. Chem. A, 2014, 2, 17446 DOI: 10.1039/C4TA03022B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements