Issue 90, 2014

The suitability of Ce3+-modified ZnO photocatalyst for the mineralization of monochlorophenol isomers in sunlight exposure

Abstract

The photocatalytic activity of Ce3+-modified hexagonal ZnO for the degradation/mineralization of monochlorophenol isomers (2-chlorophenol, 3-chlorophenol and 4-chlorophenol), in natural sunlight exposure, is reported. Compared to bare ZnO, the modified catalysts showed superior activity for the mineralization of MCP isomers. The identification of the intermediates disclosed that the mode of degradation of chlorophenol substrates also varies with increased Ce3+ loading. Increased mineralization was discovered with increasing concentration of Ce3+ at the surface of ZnO. The correlation of the results obtained by various analytical tools revealed that the photocatalytic removal of MCP isomers initially proceeds with the cleavage of the aromatic ring, the release of chloride ions and the formation of oxygenated intermediates. Finally, the intermediates are oxidized further by the oxidizing species to mineralization. The efficacy of the synthesized catalysts was tested for the mixture of chlorophenol isomers. Based on the intermediates formed, the major contribution of superoxide anion radicals was evidenced in the removal process. The Ce3+ impregnation protected the surface of ZnO against photocorrosion.

Graphical abstract: The suitability of Ce3+-modified ZnO photocatalyst for the mineralization of monochlorophenol isomers in sunlight exposure

Supplementary files

Article information

Article type
Paper
Submitted
12 Jul 2014
Accepted
16 Sep 2014
First published
16 Sep 2014

RSC Adv., 2014,4, 49347-49359

Author version available

The suitability of Ce3+-modified ZnO photocatalyst for the mineralization of monochlorophenol isomers in sunlight exposure

M. Aslam, I. M. I. Ismail, S. Chandrasekaran, T. Almeelbi and A. Hameed, RSC Adv., 2014, 4, 49347 DOI: 10.1039/C4RA07038K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements