Issue 40, 2013

High performance polymer solar cells with a polar fullerene derivative as the cathode buffer layer

Abstract

A highly efficient polymer solar cell was fabricated using a polar fullerene derivative C60 pyrrolidine tris-acid (CPTA) as the cathode buffer layer. By introducing CPTA, the Voc, Jsc and FF were all much enhanced simultaneously. The power conversion efficiency (PCE) was significantly improved to 7.92%, which outperformed the device using Ca/Al as the cathode in our experiment.

Graphical abstract: High performance polymer solar cells with a polar fullerene derivative as the cathode buffer layer

Supplementary files

Article information

Article type
Communication
Submitted
24 Jul 2013
Accepted
20 Aug 2013
First published
20 Aug 2013

J. Mater. Chem. A, 2013,1, 12413-12416

High performance polymer solar cells with a polar fullerene derivative as the cathode buffer layer

X. Li, W. Zhang, Y. Wu, C. Min and J. Fang, J. Mater. Chem. A, 2013, 1, 12413 DOI: 10.1039/C3TA12875J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements