Issue 29, 2013

Amorphous MnO2 supported on carbon nanotubes as a superior catalyst for low temperature NO reduction with NH3

Abstract

Amorphous MnO2 supported on carbon nanotubes were prepared using a co-precipitation method at room temperature and firstly used for the selective catalytic reduction of NO with NH3. The catalysts showed superior low temperature activity than that of the catalyst prepared using the conventional wet impregnation method.

Graphical abstract: Amorphous MnO2 supported on carbon nanotubes as a superior catalyst for low temperature NO reduction with NH3

Supplementary files

Article information

Article type
Communication
Submitted
28 Mar 2013
Accepted
21 May 2013
First published
22 May 2013

RSC Adv., 2013,3, 11539-11542

Amorphous MnO2 supported on carbon nanotubes as a superior catalyst for low temperature NO reduction with NH3

X. Wang, Y. Zheng, Z. Xu, X. Wang and X. Chen, RSC Adv., 2013, 3, 11539 DOI: 10.1039/C3RA41512K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements