Issue 3, 2013

Rational immobilization of methanogens in high cell density bioreactors

Abstract

Production of hydrogen sulphide by sulphate reducing bacteria (SRB) is a serious problem in anaerobic wastewater treatment, because it causes corrosion and reduces the value of methane in the biogas produced. The surface and adhesion characteristics of SRB as measured through the zeta potential are different from those of methanogens. We therefore tested the hypothesis that by choosing a carrier material with the proper surface characteristics (zeta potential) it should be possible to selectively immobilize methanogens while excluding SRB. In a series of batch tests with different support materials complete elimination of SRB was obtained on supports made of nylon, a result in line with our original hypothesis. Maximum preferential immobilization of methanogens was obtained at a temperature of 37 °C with media containing volatile fatty acids (VFA) as the carbon source. Preferential immobilization of methanogens was achieved in an anaerobic fluidized bed reactor (AFBR) with nylon granules as support and in an anaerobic rotating biological contactor (ARBC) with an acrylic disc as support. H2S-free biogas containing 63% and 38% methane were obtained from the AFBR and ARBC, respectively.

Graphical abstract: Rational immobilization of methanogens in high cell density bioreactors

Article information

Article type
Paper
Submitted
22 Aug 2012
Accepted
14 Nov 2012
First published
14 Nov 2012

RSC Adv., 2013,3, 774-781

Rational immobilization of methanogens in high cell density bioreactors

S. Z. Ahammad, R. J. Davenport, L. F. Read, J. Gomes, T. R. Sreekrishnan and J. Dolfing, RSC Adv., 2013, 3, 774 DOI: 10.1039/C2RA21901H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements