Issue 32, 2013

Control over in-channel mesostructure orientation through AAM surface modification

Abstract

The synthesis of mesostructured silica from a tetrahydrofuran (THF) based sol–gel was carried out in the channels of an anodic alumina membrane (AAM) using the evaporation induced self-assembly (EISA) method. The effect of channel surface chemistry on the orientation of the in-channel hexagonal mesostructure was studied by treating the channel walls. A variety of channel-surface modifications have been performed, including oxygen plasma treatment, atomic layer deposition (ALD) of pure alumina, and deposition of a hydrophobic monolayer. The in-channel mesostructures were characterized using transmission electron microscopy (TEM) and energy filtered TEM (EFTEM). It was found that these modifications control the concentration of anions at the channel surfaces, and consequently the orientation of the hexagonal mesostructure. Namely, high anion concentration at the channel surface induces the formation of the desired vertically aligned columnar hexagonal phase. A model to understand the effect of anions at the channel wall on the competition between mesostructure phase transformation and silica condensation is proposed. Finally, this study demonstrates that by judiciously modifying the chemistry at the channel walls the formation of desired orientations can be induced.

Graphical abstract: Control over in-channel mesostructure orientation through AAM surface modification

Article information

Article type
Paper
Submitted
14 May 2013
Accepted
30 May 2013
First published
04 Jun 2013

Phys. Chem. Chem. Phys., 2013,15, 13637-13645

Control over in-channel mesostructure orientation through AAM surface modification

A. Keller, T. Segal-Peretz, Y. Kauffmann and G. L. Frey, Phys. Chem. Chem. Phys., 2013, 15, 13637 DOI: 10.1039/C3CP52033A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements