Harnessing the open-circuit voltage via a new series of Ru(ii) sensitizers bearing (iso-)quinolinyl pyrazolate ancillaries†
Abstract
A novel class of Ru(II) sensitizers (TFRS-51–TFRS-54) with a 4,4′-dicarboxy-2,2′-bipyridine anchoring
* Corresponding authors
a
Department of Chemistry and Low Carbon Energy Research Center, National Tsing Hua University, Hsinchu 30013, Taiwan
E-mail:
ychi@mx.nthu.edu.tw
b
Institute of Chemical Research of Catalonia (ICIQ), Avda. Països Catalans 16, 43007 Tarragona, Spain
E-mail:
jnclifford@iciq.es
c ICREA, Avda. Lluís Companys 28, Barcelona E-08030, Spain
d
Department of Chemistry and Center for Emerging Material and Advanced Devices, National Taiwan University, Taipei 10617, Taiwan
E-mail:
chop@ntu.edu.tw
e
Ecole polytechnique fédérale de Lausanne, Institute of Chemical Sciences and Engineering, Laboratory of Photonics and Interfaces, 1015 Lausanne, Switzerland
E-mail:
mdkhaja.nazeeruddin@epfl.ch
A novel class of Ru(II) sensitizers (TFRS-51–TFRS-54) with a 4,4′-dicarboxy-2,2′-bipyridine anchoring
If you are not the author of this article and you wish to reproduce material from it in a third party non-RSC publication you must formally request permission using Copyright Clearance Center. Go to our Instructions for using Copyright Clearance Center page for details.
Authors contributing to RSC publications (journal articles, books or book chapters) do not need to formally request permission to reproduce material contained in this article provided that the correct acknowledgement is given with the reproduced material.
Reproduced material should be attributed as follows:
If the material has been adapted instead of reproduced from the original RSC publication "Reproduced from" can be substituted with "Adapted from".
In all cases the Ref. XX is the XXth reference in the list of references.
If you are the author of this article you do not need to formally request permission to reproduce figures, diagrams etc. contained in this article in third party publications or in a thesis or dissertation provided that the correct acknowledgement is given with the reproduced material.
Reproduced material should be attributed as follows:
If you are the author of this article you still need to obtain permission to reproduce the whole article in a third party publication with the exception of reproduction of the whole article in a thesis or dissertation.
Information about reproducing material from RSC articles with different licences is available on our Permission Requests page.
Fetching data from CrossRef.
This may take some time to load.