Issue 2, 2012

Photosensitization of ZnO rod electrodes with AgInS2nanoparticles and ZnS-AgInS2 solid solution nanoparticles for solar cell applications

Abstract

Nanoparticles of a ZnS-AgInS2 solid solution (ZAIS) were successfully immobilized on the surface of ZnO nanorod electrodes without using additional cross-linking agents. Irradiation of ZAIS-immobilized ZnO rod electrodes produced an anodic photocurrent, indicating that ZAIS particles worked as a photosensitizer and that the photogenerated electrons in ZAIS were injected into the conduction band of ZnO nanorods. The magnitude of the photocurrent increased with the red shift of the absorption onset of immobilized ZAIS nanoparticles. Sandwich-type solar cells fabricated with the ZAIS-loaded ZnO nanorod electrode as a working electrode and an acetonitrile solution containing the redox couple of Iāˆ’/I3āˆ’ exhibited a photoresponse in the visible light region, being dependent on the chemical composition of the immobilized ZAIS particles. Action spectra of photocurrent agreed well with the diffuse reflectance spectra of the corresponding electrodes. The optimum energy conversion efficiency was 0.72% under irradiation with simulated light of AM 1.5.

Graphical abstract: Photosensitization of ZnO rod electrodes with AgInS2 nanoparticles and ZnS-AgInS2 solid solution nanoparticles for solar cell applications

Article information

Article type
Paper
Submitted
07 Jul 2011
Accepted
06 Oct 2011
First published
15 Nov 2011

RSC Adv., 2012,2, 552-559

Photosensitization of ZnO rod electrodes with AgInS2 nanoparticles and ZnS-AgInS2 solid solution nanoparticles for solar cell applications

T. Sasamura, K. Okazaki, A. Kudo, S. Kuwabata and T. Torimoto, RSC Adv., 2012, 2, 552 DOI: 10.1039/C1RA00423A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements