Issue 45, 2012

Structure evolution and dielectric behavior of polystyrene-capped barium titanate nanoparticles

Abstract

Polystyrene-capped barium titanate (BaTiO3) nanoparticles with sizes of 11 nm and 27 nm were prepared using amphiphilic star-like diblock copolymer templates. The crystal structure evolution of these nanoparticles over a wide temperature range (10–428 K) was investigated by powder X-ray diffraction. The Rietveld refinement indicates that the abrupt structural transitions observed in micron-sized powders become broad as the particle size is reduced to a few tens of nanometers. The orthorhombic phase (Amm2) is observed in the range of 10–388 K, coexisting with the rhombohedral phase (R3c) at lower temperatures and with the tetragonal phase (P4mm) at higher temperatures. At room temperature (300 K), polystyrene-capped BaTiO3 nanoparticles, both 11 and 27 nm sizes, primarily adopt the tetragonal phase, transforming to the cubic phase (Pm[3 with combining macron]m) at 398 K during heating. The phase evolution of the nanoparticles correlates well with their dielectric behavior. With the Landauer–Bruggeman effective approximation, the dielectric properties at room temperature of the BaTiO3 core were calculated and the results are in agreement with the size effect of BaTiO3 nanocrystals.

Graphical abstract: Structure evolution and dielectric behavior of polystyrene-capped barium titanate nanoparticles

Article information

Article type
Paper
Submitted
17 Aug 2012
Accepted
20 Sep 2012
First published
20 Sep 2012

J. Mater. Chem., 2012,22, 23944-23951

Structure evolution and dielectric behavior of polystyrene-capped barium titanate nanoparticles

H. Z. Guo, Ya. Mudryk, M. I. Ahmad, X. C. Pang, L. Zhao, M. Akinc, V. K. Pecharsky, N. Bowler, Z. Q. Lin and X. Tan, J. Mater. Chem., 2012, 22, 23944 DOI: 10.1039/C2JM35600G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements