Issue 44, 2012

Super-tough conducting carbon nanotube/ultrahigh-molecular-weight polyethylene composites with segregated and double-percolated structure

Abstract

Super-tough conducting carbon nanotube (CNT)/ultrahigh-molecular-weight polyethylene (UHMWPE) composites were prepared by a facile method; a very small amount of high-density polyethylene (HDPE) was used as the percolated polymer phase to load the CNTs. A structural examination revealed the formation of unique conductive networks by combination of the typical segregated and double-percolated structure, in which the fully percolated CNT/carrier polymer layers were localized at the interfaces between UHMWPE granules. Owing to the synergistic effect of the segregated and double-percolated structures, only 0.3 wt% of CNTs can make the composite very conductive. More interestingly, after the addition of only 2.7 wt% of HDPE, the ultimate strain, tear strength, and impact strength reached 478%, 35.3 N and 58.1 kJ m−2, respectively; these corresponded to remarkable increases of 265%, 61.9%, and 167% in these properties compared with the conventional segregated materials. These results were ascribed to the intensified interfacial adhesion between UHMWPE granules, which resulted from the strong inter-diffusion and heat-sealing between the HDPE and UHMWPE molecules. A model was proposed to explain the outstanding ductility and toughness properties of the segregated and double-percolated CPC material.

Graphical abstract: Super-tough conducting carbon nanotube/ultrahigh-molecular-weight polyethylene composites with segregated and double-percolated structure

Supplementary files

Article information

Article type
Paper
Submitted
20 Jul 2012
Accepted
17 Sep 2012
First published
19 Sep 2012

J. Mater. Chem., 2012,22, 23568-23575

Super-tough conducting carbon nanotube/ultrahigh-molecular-weight polyethylene composites with segregated and double-percolated structure

H. Pang, D. Yan, Y. Bao, J. Chen, C. Chen and Z. Li, J. Mater. Chem., 2012, 22, 23568 DOI: 10.1039/C2JM34793H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements