Issue 9, 2012

Room temperature selective oxidation of cyclohexane over Cu-nanoclusters supported on nanocrystalline Cr2O3

Abstract

Cu-nanoclustures supported on nanocrystalline Cr2O3 were prepared by a hydrothermal synthesis method in the presence of surfactant, cetyltrimethylammonium bromide (CTAB). It was found that the catalyst is highly active for the selective oxidation of cyclohexane with H2O2 at room temperature. The catalyst was characterized by XRD, ICP-AES, XPS, TPR, BET-surface area, SEM, TEM and EXAFS. The effect of Cu loading and the influence of reaction parameters, such as the substrate to oxidant molar ratio and reaction time, were investigated in detail. The investigation revealed that the size of copper plays a crucial role towards the activity by favoring the oxidation of cyclohexane. The reusability of the catalyst was tested by conducting repeat experiments with the same catalyst, where it was found that the catalyst displays no changes in its activity and selectivity even after 4 reuses. The cyclohexane conversion of 86% with a cyclohexanone selectivity of 85%, and an overall C6 selectivity (cyclohexanol and cyclohexanone) of 100% was achieved after 3 h of reaction at room temperature, over 4.3 wt% Cu loaded on nanocrystalline Cr2O3.

Graphical abstract: Room temperature selective oxidation of cyclohexane over Cu-nanoclusters supported on nanocrystalline Cr2O3

Supplementary files

Article information

Article type
Paper
Submitted
01 May 2012
Accepted
05 Jul 2012
First published
06 Jul 2012

Green Chem., 2012,14, 2600-2606

Room temperature selective oxidation of cyclohexane over Cu-nanoclusters supported on nanocrystalline Cr2O3

B. Sarkar, P. Prajapati, R. Tiwari, R. Tiwari, S. Ghosh, S. Shubhra Acharyya, C. Pendem, R. Kumar Singha, L. N. Sivakumar Konathala, J. Kumar, T. Sasaki and R. Bal, Green Chem., 2012, 14, 2600 DOI: 10.1039/C2GC35658A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements