Issue 8, 2012

A membraneless hydrogen peroxidefuel cell using Prussian Blue as cathode material

Abstract

This communication describes the exploitation of Prussian Blue, ferric ferrocyanide (Fe4III[FeII(CN)6]3), for the cathode side in a single-chamber membraneless fuel cell running on hydrogen peroxide (H2O2) as both fuel and oxidant. An open-circuit voltage (OCV) of 0.6 V has been obtained, which could be the highest OCV with H2O2 ever reported. The maximum power density was 1.55 mW cm−2 which showed a stable long-term operation in acidic media.

Graphical abstract: A membraneless hydrogen peroxide fuel cell using Prussian Blue as cathode material

Supplementary files

Article information

Article type
Communication
Submitted
30 Mar 2012
Accepted
24 May 2012
First published
30 May 2012

Energy Environ. Sci., 2012,5, 8225-8228

A membraneless hydrogen peroxide fuel cell using Prussian Blue as cathode material

S. A. Mousavi Shaegh, N. Nguyen, S. M. Mousavi Ehteshami and S. H. Chan, Energy Environ. Sci., 2012, 5, 8225 DOI: 10.1039/C2EE21806B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements