Issue 1, 2012

Nanoporous surface alloys as highly active and durable oxygen reduction reaction electrocatalysts

Abstract

It is of critical importance to design and fabricate highly active and durable oxygen reduction reaction (ORR) catalysts for the application of proton exchange membrane fuel cells (PEMFCs). By a simple two-step dealloying process, the active components in a Pt/Ni/Al ternary alloy were sequentially leached out in a highly controllable manner, generating a novel nanoporous surface alloy structure. Characterized by an open bicontinuous spongy morphology, the resulting nanostructure is interconnected by ∼3 nm diameter ligaments which are comprised of a Pt/Ni alloy core and a nearly pure Pt surface. In the absence of any catalyst support, these nanoporous surface alloys show much enhanced durability and electrocatalytic activity for ORR as compared to the commercial Pt/C catalyst. At a high potential, such as 0.9 V versusRHE, nanoporous Pt/Ni surface alloys show a remarkable specific activity of 1.23 mA cm−2. These nanomaterials thus hold great potential as cathode catalysts in PEMFCs in terms of facile preparation, clean catalyst surface, and enhanced ORR activity and durability.

Graphical abstract: Nanoporous surface alloys as highly active and durable oxygen reduction reaction electrocatalysts

Supplementary files

Article information

Article type
Paper
Submitted
29 Jul 2011
Accepted
15 Sep 2011
First published
27 Oct 2011

Energy Environ. Sci., 2012,5, 5281-5286

Nanoporous surface alloys as highly active and durable oxygen reduction reaction electrocatalysts

R. Wang, C. Xu, X. Bi and Y. Ding, Energy Environ. Sci., 2012, 5, 5281 DOI: 10.1039/C1EE02243A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements