Preparation of CoNi high surface area porous foams by substrate controlled electrodeposition
Abstract
We demonstrate that nanofabrication of 3D dendritic CoNi alloy foams with an open porous structure can be achieved by
* Corresponding authors
a
CEST, Centre of Electrochemical Surface Technology, Viktor-Kaplan-Strasse 2, 2700 Wr. Neustadt, Austria
E-mail:
lidija.rafailovic@cest.at
Fax: +43 2622 22266-50
Tel: +43 2622 22266-46
b University of Vienna, Physics of Nanostructured Materials, Boltzmanngasse 5, 1090 Vienna, Austria
c Graz University of Technology, Institute for Chemistry and Technology of Materials, Stemayergasse 16, 8010 Graz, Austria
We demonstrate that nanofabrication of 3D dendritic CoNi alloy foams with an open porous structure can be achieved by
L. D. Rafailović, C. Gammer, C. Rentenberger, C. Kleber, A. H. Whitehead, B. Gollas and H. Karnthaler, Phys. Chem. Chem. Phys., 2012, 14, 972 DOI: 10.1039/C1CP22503K
To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.
If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.
If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.
Read more about how to correctly acknowledge RSC content.
Fetching data from CrossRef.
This may take some time to load.
Loading related content