High performance additive manufactured scaffolds for bone tissue engineering application†
Abstract
This study demonstrates the feasibility of additive manufactured poly(ε-caprolactone)/silanized
* Corresponding authors
a
Institute of Materials Research and Engineering (IMRE), 3 Research Link, Singapore
E-mail:
x-li@imre.a-star.edu.sg
Fax: +65 6872 7528
Tel: +65 6874 8421
b Division of Bioengineering, NUS, Singapore
c Department of Materials Science & Engineering (DMSE), Faculty of Engineering, National University of Singapore (NUS), Singapore
d Institute of Health and Biomedical Innovation, Queensland University of Technology (QUT), Brisbane, Australia
e
Department of Mechanical Engineering, National University of Singapore (NUS), Singapore
E-mail:
mpegi@nus.edu.sg
Fax: +65 6779 1495
Tel: +65 9277 7343
This study demonstrates the feasibility of additive manufactured poly(ε-caprolactone)/silanized
M. Tarik Arafat, C. X. F. Lam, A. K. Ekaputra, S. Y. Wong, C. He, D. W. Hutmacher, X. Li and I. Gibson, Soft Matter, 2011, 7, 8013 DOI: 10.1039/C1SM05793F
To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.
If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.
If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.
Read more about how to correctly acknowledge RSC content.
Fetching data from CrossRef.
This may take some time to load.
Loading related content