Jump to main content
Jump to site search

Issue 10, 2010
Previous Article Next Article

Bonding of microfluidic devices fabricated in polycarbonate

Author affiliations

Abstract

A simple method for bonding polycarbonate, based on controlled exposure of the pieces to vapours of solvents, yields a tight seal and unmodified geometry of the channels.

Graphical abstract: Bonding of microfluidic devices fabricated in polycarbonate

Back to tab navigation

Supplementary files

Article information


Submitted
20 Nov 2009
Accepted
27 Jan 2010
First published
25 Feb 2010

Lab Chip, 2010,10, 1324-1327
Article type
Technical Note

Bonding of microfluidic devices fabricated in polycarbonate

D. Ogończyk, J. Węgrzyn, P. Jankowski, B. Dąbrowski and P. Garstecki, Lab Chip, 2010, 10, 1324 DOI: 10.1039/B924439E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.


Social activity

Search articles by author

Spotlight

Advertisements