Issue 9, 2010

Laser ablation assisted spark induced breakdownspectroscopy on soil samples

Abstract

Laser ablation-spark induced breakdown spectroscopy (LA-SIBS), characterized by a developed high voltage fast pulse discharge spark, allows direct in-site analysis of non-conductive material without prior sample preparation. Currently laser induced breakdown spectroscopy (LIBS) permits qualitative analysis of a solid or liquid sample by ablating a tiny portion of it, then analyzing the resulting plasma. The LA-SIBS takes this a step further by employing a specifically designed high voltage and fast pulse discharge circuit to enhance plasma emission produced by laser ablation. In this article, LA-SIBS was used for optical emission spectroscopy of soil and compared with a single pulse (SP) LIBS technique. Except for great signal enhancement of plasma emission, the precision in terms of relative standard deviation (RSD) was generally improved by about 2 to 3 times. In addition, the signal to noise (S/N) ratio was improved by about 2 to 3 times as well. These characteristics will thereby probably benefit sensitivity for minor element analysis in most potential analytes. The signal enhancement with improved precision and S/N ratio on soil samples by LA-SIBS was demonstrated.

Graphical abstract: Laser ablation assisted spark induced breakdown spectroscopy on soil samples

Article information

Article type
Technical Note
Submitted
23 Oct 2009
Accepted
26 Apr 2010
First published
25 May 2010

J. Anal. At. Spectrom., 2010,25, 1475-1481

Laser ablation assisted spark induced breakdown spectroscopy on soil samples

K. LI, W. Zhou, Q. Shen, Z. Ren and B. Peng, J. Anal. At. Spectrom., 2010, 25, 1475 DOI: 10.1039/B922187E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements