Issue 7, 2009

The effect of adhesion promoter on the adhesion of PDMS to different substrate materials

Abstract

The effect of the adhesion promoter GE SS4120 on the adhesion strength of PDMS to different substrates was tested. The adhesion to silicon, glass and aluminium was significantly increased, while adhesion of PDMS to Teflon® remained poor, and the adhesion strength of PDMS to PDMS decreased.

Graphical abstract: The effect of adhesion promoter on the adhesion of PDMS to different substrate materials

Article information

Article type
Technical Note
Submitted
07 Aug 2008
Accepted
24 Nov 2008
First published
15 Dec 2008

Lab Chip, 2009,9, 1002-1004

The effect of adhesion promoter on the adhesion of PDMS to different substrate materials

L. Kersey, V. Ebacher, V. Bazargan, R. Wang and B. Stoeber, Lab Chip, 2009, 9, 1002 DOI: 10.1039/B813757A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements