Jump to main content
Jump to site search
PLANNED MAINTENANCE Close the message box

Scheduled maintenance work on Wednesday 22nd May 2019 from 11:00 AM to 1:00 PM (GMT).

During this time our website performance may be temporarily affected. We apologise for any inconvenience this might cause and thank you for your patience.

Issue 20, 2008
Previous Article Next Article

Highly efficient high temperature electrolysis

Author affiliations


High temperature electrolysis of water and steam may provide an efficient, cost effective and environmentally friendly production of H2 using electricity produced from sustainable, non-fossil energy sources. To achieve cost competitive electrolysis cells that are both high performing i.e. minimum internal resistance of the cell, and long-term stable, it is critical to develop electrode materials that are optimal for steam electrolysis. In this article electrolysis cells for electrolysis of water or steam at temperatures above 200 °C for production of H2 are reviewed. High temperature electrolysis is favourable from a thermodynamic point of view, because a part of the required energy can be supplied as thermal heat, and the activation barrier is lowered increasing the H2 production rate. Only two types of cells operating at high temperature (above 200 °C) have been described in the literature, namely alkaline electrolysis cells (AEC) and solid oxide electrolysis cells (SOEC). In the present review emphasis is on state-of-the art electrode materials and development of new materials for SOECs. Based on the state-of-the-art performance for SOECs H2 production by high temperature steam electrolysis using SOECs is competitive to H2 production from fossil fuels at electricity prices below 0.02–0.03 € per kWh. Though promising SOEC results on H2 production have been reported a substantial R&D is still required to obtain inexpensive, high performing and long-term stable electrolysis cells.

Graphical abstract: Highly efficient high temperature electrolysis

Back to tab navigation

Publication details

The article was received on 05 Dec 2007, accepted on 03 Jan 2008 and first published on 31 Jan 2008

Article type: Feature Article
DOI: 10.1039/B718822F
J. Mater. Chem., 2008,18, 2331-2340

  •   Request permissions

    Highly efficient high temperature electrolysis

    A. Hauch, S. D. Ebbesen, S. H. Jensen and M. Mogensen, J. Mater. Chem., 2008, 18, 2331
    DOI: 10.1039/B718822F

Search articles by author