Ultra stable ordered mesoporous phenol/formaldehydepolymers as a heterogeneous support for vanadium oxide†
Abstract
Ordered mesoporous
Please wait while we load your content...
Supplementary files
- Fig. S1: Wide angle powder XRD-pattern of the P/F resin before and after vanadiumdeposition PDF (93K)
- Fig. S2: V 2p 3/2 region in the XPS spectra of phenol/formaldehyde resin after gasphase deposition of VOCl 3 (a) before and (b) after argon bombardment PDF (51K)
- Fig. S3: TGA measurement under air (10?C/min) of the P/F resin PDF (14K)
- Fig. S4: TEM image of mesoporous P/F resin calcined at 350 ?C PDF (632K)
- Fig. S5: 3D and 2D AFM images of mesoporous P/F resin calcined at 350 ?C PDF (62K)
Article information
- Article type
- Communication
- Submitted
- 20 May 2008
- Accepted
- 10 Jun 2008
- First published
- 29 Jul 2008
Chem. Commun., 2008, 4475-4477
Permissions
Ultra stable ordered mesoporous phenol /formaldehyde polymers as a heterogeneous support for vanadium oxide
I. Muylaert, M. Borgers, E. Bruneel, J. Schaubroeck, F. Verpoort and P. Van Der Voort, Chem. Commun., 2008, 4475 DOI: 10.1039/B808566H
To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.
If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.
If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.
Read more about how to correctly acknowledge RSC content.
