Ordered 2D arrays of ferromagnetic Fe/Co nanoparticle rings from a highly metallized metallopolymer precursor
Abstract
Ordered 2D arrays of ferromagnetic Fe/Co alloy nanoparticle rings with diameters of 2–12 µm were fabricated via
* Corresponding authors
a
Department of Chemistry, University of Toronto, Toronto, Ontario M5S 3H6, Canada
E-mail:
imanners@chem.utoronto.ca, gozin@chem.utoronto.ca
b Department of Chemical Engineering & Applied Chemistry, Institute of Biomaterials and Biomedical Engineering, University of Toronto, Toronto, Ontario M5S 3G9, Canada
c
Department of Materials Science and Engineering, University of Toronto, Toronto, Ontario M5S 3E4, Canada
E-mail:
Zhenghong.lu@utoronto.ca
d Surface Interface Ontario, Department of Chemical Engineering & Applied Chemistry, University of Toronto, Toronto, Ontario M5S 3E5, Canada
Ordered 2D arrays of ferromagnetic Fe/Co alloy nanoparticle rings with diameters of 2–12 µm were fabricated via
S. B. Clendenning, S. Fournier-Bidoz, A. Pietrangelo, G. Yang, S. Han, P. M. Brodersen, C. M. Yip, Z. Lu, G. A. Ozin and I. Manners, J. Mater. Chem., 2004, 14, 1686 DOI: 10.1039/B402027H
To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.
If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.
If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.
Read more about how to correctly acknowledge RSC content.
Fetching data from CrossRef.
This may take some time to load.
Loading related content