Magnesium isotope heterogeneity of the isotopic standard SRM980 and new reference materials for magnesium-isotope-ratio measurements

Abstract

Multicollector ICP-MS has been used for the precise measurement of variations in the isotopic composition of the isotopic standard of magnesium (SRM980) provided by the National Institute of Standards and Technology (Gaithersburg, MD, USA). The SRM980 consists of metal chips weighing between 1 and 50 mg and each unit delivered by the National Institute of Standards and Technology corresponds to a bottle containing about 0.3 g. Height units were analysed. Variations in sample ²⁵Mg/²⁴Mg, and ²⁶Mg/²⁴Mg ratios are expressed as δ²⁵Mg and δ²⁶Mg units, respectively, which are deviations in parts per 10³ from the same ratio in a standard solution. The differences in δ²⁵Mg and δ²⁶Mg of the SRM980 are up to 4.20 and 8.19‰, respectively, while the long-term repeatability of δ²⁵Mg and δ²⁶Mg are 0.09 and 0.16‰, respectively, at 95% confidence. However, when plotted in a three-isotope diagram, all the data fall on a single mass fractionation line. Overall limits of error of the SRM980 reported here fall within the previously reported overall limits of error. The isotopic heterogeneity not only corresponds to differences among units but has been found at the chip-size level. This result, due to the precision of the MC-ICP-MS technique, makes the SRM980 inappropriate for the international isotopic standard of magnesium. The SRM980 can still be used to report the excess of ²⁶Mg, which is defined by the deviation from the mass-dependent relationship between ²⁵Mg/²⁴Mg, and ²⁶Mg/²⁴Mg ratios. Two large batches (around 10 g of Mg in each) of pure Mg solutions (in 0.3 M HNO₃) have been prepared and characterised. These 2 solutions (DSM3 and Cambridge 1) are suitable reference material because they are immune to heterogeneity. DSM3 and Cambridge 1 are isotopically different (by 1.3‰ per u) and are available upon request from the first author. In addition, DSM3 has an isotopic composition very similar to the Mg-isotopic composition of carbonaceous chondrites (Orgueil and Allende). Because of the lack of heterogeneity and the cosmochemical and geochemical significance of DSM3, we urge the use of DSM3 as the primary isotopic reference material to report Mg-isotopic variations.