Issue 7, 2002

Comparison of the analytical performance of high-powered, microwave-induced air plasma and nitrogen plasma atomic emission spectrometry

Abstract

A high-powered, microwave-induced air plasma (air-MIP) generated by an Okamoto cavity at atmospheric pressure was investigated and compared with a nitrogen plasma (N2-MIP) generated by the same cavity under the same conditions. The analytical performance of the plasmas was evaluated and compared with regard to excitation temperatures, electron-number densities, detection limits and tolerance to direct organic solvent introduction. The excitation temperature of the air-MIP was in the range of 4150–4750 K when the microwave power varied from 0.8 to 1.3 kW, which was 300–400 K lower than those of the N2-MIP. The electron number densities in the air-MIP ranged from 1 to 6 × 1014 cm−3, which was about one order of magnitude higher than those of the N2-MIP. The detection limits for 17 elements with a total of 38 atomic and ionic lines were determined. For most of the spectral lines with lower excitation energies, the detection limits obtained from the air-MIP were comparable with those obtained from the N2-MIP, whereas for those spectral lines with higher excitation energies, the detection limits in the air-MIP were much poorer than those in the N2-MIP. Preliminary experiments showed that the air-MIP was highly tolerant to direct organic solvent introduction.

Article information

Article type
Paper
Submitted
19 Mar 2002
Accepted
20 May 2002
First published
18 Jun 2002

J. Anal. At. Spectrom., 2002,17, 699-703

Comparison of the analytical performance of high-powered, microwave-induced air plasma and nitrogen plasma atomic emission spectrometry

Z. Zhang and K. Wagatsuma, J. Anal. At. Spectrom., 2002, 17, 699 DOI: 10.1039/B202777C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements