Issue 6, 2002

Portable X-ray fluorescence in the characterisation of arsenic contamination associated with industrial buildings at a heritage arsenic works site near Redruth, Cornwall, UK

Abstract

An investigation using in situ analysis by portable X-ray fluorescence (PXRF) has shown that contamination present on industrial buildings at a heritage arsenic works site near Redruth, Cornwall, UK results from the absorption of arsenic by porous and semi-porous building materials that were in contact with arsenic-rich flue gases. Results from a preliminary survey indicate that arsenic remains locked in these materials and is being gradually leached out by weathering processes. This weathering causes general contamination of the adjacent building surfaces averaging 1845 µg g−1 arsenic, presumably caused by evaporation of leach solutions in contact with air at the surface of the building materials. More extensive crystalline deposits were found under arches protected from dissolution and further dispersion by rain water. These deposits appeared to comprise calcium sulfate (gypsum), associated with on average between 1.2 and 6.8% m/m As. In situ PXRF proved to be highly effective in locating sources of contamination at the site and in providing data that allowed a hypotheses for the origin of this contamination to be formulated and tested in the field.

Article information

Article type
Paper
Submitted
24 Jul 2002
Accepted
01 Oct 2002
First published
22 Oct 2002

J. Environ. Monit., 2002,4, 1017-1024

Portable X-ray fluorescence in the characterisation of arsenic contamination associated with industrial buildings at a heritage arsenic works site near Redruth, Cornwall, UK

P. J. Potts, M. H. Ramsey and J. Carlisle, J. Environ. Monit., 2002, 4, 1017 DOI: 10.1039/B207259A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements