Issue 5, 1999

Structure, morphology and surface properties of nanostructured ZrO2 particles

Abstract

Nanocrystalline zirconium dioxide particles have been produced by means of thermal decomposition of a liquid metal organic precursor in a flow reactor system. X-Ray diffraction patterns show that the powder consists of a mixture of the monoclinic and tetragonal phase and that the phase fractions depend on the experimental conditions during the preparation as well as on the subsequent thermal treatment of the sample. The mean particle diameter of the synthesized powders is ca. 40-50 Å as estimated from the line width of Bragg reflections and from transmission electron micrographs. The crystallites are non-porous and exhibit a rough surface incorporating a high concentration of low-coordinated surface sites. In agreement with the small particle size, the powder has a high specific surface area (>200 m 2 g –1 ), which surmounts that of commercially available materials by a factor >3. The structure and morphology of the particles is essentially preserved during extensive thermal treatment up to 500 °C. Hydroxyl groups as IR active surface probes clearly indicate that the phase fractions on the surface and in the bulk strongly differ from each other. Low-coordinated OH groups on monoclinic surface domains give rise to H/D exchange reactions with D 2 already at room temperature. They are evidenced and monitored with time by FTIR spectroscopy.

Article information

Article type
Paper

J. Mater. Chem., 1999,9, 1203-1209

Structure, morphology and surface properties of nanostructured ZrO2 particles

S. Benfer and E. Knözinger, J. Mater. Chem., 1999, 9, 1203 DOI: 10.1039/A809164A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements