Issue 18, 1995

Hydrogenation of propyne over palladium catalysts

Abstract

The hydrogenation of propyne on a range of supported palladium catalysts has been investigated. The catalysts all showed 100% selectivity to propene. A non-steady-state regime was observed when the catalysts were brought on line. During this period there was significant carbon laydown resulting in a surface Pd:C ratio of 1:3 with two of the catalysts tested. Once this level of laydown was reached, steady-state operation was achieved. In the steady state the amount of carbon laydown was reduced and activity was reproducible; the orders of reaction for propyne and dihydrogen were obtained. The order with respect to dihydrogen varied between 1.3 for the Pd/zirconia to 0.6 for the Pd/silica, while the order for propyne varied between 0.0 and 0.4. Analysis of the surface species by infrared spectroscopy revealed the presence of the horizontal and vertically bonded propyne, a di-sigma adsorbed propene and propylidyne. A mechanism for the reaction system has been postulated.

Article information

Article type
Paper

J. Chem. Soc., Faraday Trans., 1995,91, 3269-3274

Hydrogenation of propyne over palladium catalysts

S. D. Jackson and N. J. Casey, J. Chem. Soc., Faraday Trans., 1995, 91, 3269 DOI: 10.1039/FT9959103269

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements