Issue 17, 1994

One-electron oxidation of iron(II)–imidazole and iron(II)–bis[imidazol-2-yl]methane complexes: a pulse radiolysis study

Abstract

The radical anion, Br2˙–, a strong one-electron oxidant, has been used to oxidise iron(II)–imidazole, FeII–ImH, and iron(II)–bis(imidazol-2-yl)methane, FeII–2-BIM, complexes in aqueous solution, the latter being regarded as good models of the iron(II) site in non-haem iron-containing enyzmes such as lipoxygenase. The rates of oxidation of FeII–lmH, FeII(ImH)2, Fe–2-BIM and FeII(2-BIM)2 were measured as 1.0 × 107, 2.0 × 107, 1.8 × 108 and 3.6 × 108 dm3 mol–1 s–1. From measurements of the rates of oxidation of the ligand, it is clear that Br2˙– oxidises the ligand in the metal complexes in the first instance. The same studies also show that the 2-BIM ligand is easier to oxidise than the closely related imidazole ligand by a factor of 10. Measurements of the rate of oxidation of 2-methylimidazole indicate that the difference is attributable to the inductive effect of the —CH2— group.

The spectra of the transient initial products of the iron(II)–imidazole oxidation are very similar to the imidazole free radical spectra suggesting either very weak metal–ligand charge transfer, MLCT, character in the metal–free radical complex or that the complex dissociates rapidly (> 106 s–1) to yield an imidazole free radical. In contrast, the initial iron(II)–2-BIM products exhibit spectra which are three to six times more intense than the 2-BIM free radical spectrum. For the ML product, this is attributed to MLCT transitions of the metal–2-BIM free radical species, whereas for ML2, it is proposed that the spectrum is assigned to an FeIII–2-BIM complex, formed following fast intramolecular electron transfer (>106 s–1) within the FeII–2-BIM free radical complex.

The data are in contrast to similar data obtained for iron(II)–histidine complexes in an earlier study (Parsons M. Al-Hakim, G. O. Phillips and A. J. Swallow, J. Chem. Soc., Faraday Trans. 1, 1986, 82, 1575) where the oxidation process was not found to be controlled by initial oxidation of the histidine ligand. It is suggested that these differences are attributable to a greater degree of covalent character in the metal–ligand bonding in the iron(II)–histidine complex compared with the weaker, largely electrostatic bonds, in iron(II)–imidazole complexes.

Article information

Article type
Paper

J. Chem. Soc., Faraday Trans., 1994,90, 2467-2474

One-electron oxidation of iron(II)–imidazole and iron(II)–bis[imidazol-2-yl]methane complexes: a pulse radiolysis study

B. J. Parsons, S. Navaratnam, Z. Zhao and L. Chen, J. Chem. Soc., Faraday Trans., 1994, 90, 2467 DOI: 10.1039/FT9949002467

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements