Issue 11, 1990

Electrocatalytic detection of streptomycin and related antibiotics at ruthenium dioxide modified graphite-epoxy composite electrodes

Abstract

The application of ruthenium dioxide (RuO2) modified electrodes to the electrocatalytic detection of the saccharide-related antibiotics streptomycin, novobiocin and neomycin, at low fixed potentials, was investigated. The RuO2-modified graphite-epoxy composite electrodes give extremely stable and reproducible catalytic oxidation currents for these antibiotics at potentials as low as +0.2 V (versus Ag-AgCl). Rapid quantification at the micromolar level is therefore possible. Standard calibration graphs for streptomycin and neomycin yielded slopes of 4.43 and 0.08 nA µM–1 over the linear ranges of 1.5 × 10–6–2.5 × 10–4 and 1 × 10–5–2 × 10–3M, respectively. Owing to its catalytic oxidation by the RuIII-RuIV couple, rather than the RuIV-RuVI transition (which catalyses the oxidation of streptomycin and neomycin), novobiocin could be detected at a lower (+0.2 V) potential, with a sensitivity of 1.31 nA µM–1. Detection limits of 1.5, 6.0 and 10 µM were obtained for streptomycin, novobiocin and neomycin, respectively. These catalytic surfaces can be renewed (by polishing), with a surface-to-surface reproducibility of 6.5% for the detection of 5 × 10–5M streptomycin. The analytical application of RuO2-modified carbon paste electrodes to the analysis of these antibiotics by flow injection was investigated, with a view to liquid chromatographic separation with electrochemical detection applications.

Article information

Article type
Paper

Analyst, 1990,115, 1447-1450

Electrocatalytic detection of streptomycin and related antibiotics at ruthenium dioxide modified graphite-epoxy composite electrodes

D. Leech, J. Wang and M. R. Smyth, Analyst, 1990, 115, 1447 DOI: 10.1039/AN9901501447

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements