Issue 1, 1986

Kinetic study of Mg(3 3PJ), Mg(3 1P1) and Mg(4 3S1), including energy pooling, following pulsed dye-laser excitation at λ= 457.1 nm [Mg(3 3P1)â†� Mg(3 1S0)]

Abstract

The kinetic study of Mg(3 1P1) and Mg(4 3S1), 4.346 and 5.108 eV above the 3 1S0 ground state, has been investigated as a function of temperature and pressure of the gases He and Kr following pulsed dye-laser excitation of magnesium vapour at λ= 457.1 nm [Mg(3 3P1)â†� Mg(3 1S0)]. Mg(3 3PJ), Mg(3 1P1), and Mg(4 3S1) were monitored in the time-domain by measurements of the atomic emission at λ= 457.1 nm, λ= 285.3 nm [Mg(3 1P1)→ Mg(3 1S0)+hν], and λ(average)= 517.6 nm [Mg(4 3S1)→ Mg(3 3PJ)+hν]. Kinetic measurements on the decay of Mg(3 3PJ) in He and Kr in the range 600–1100 K yielded the temperature dependence of the diffusion coefficients, when expressed in the form D[Mg(3 3PJ)–He] and D[Mg(3 3PJ)–Kr]∝Tn, of n= 1.64 ± 0.09 and 1.65 ± 0.09, respectively. The collisional quenching of Mg(3 3PJ) by Kr has also been investigated in this temperature range, yielding the following alternative forms for the temperature-dependent rate constant: kKr=(2.9 ± 0.7)× 10–15 exp (–3.1 ± 0.5 kJ mol–1/RT) cm3 atom–1 s–1 or kKr=(6.0 ± 0.5)× 10–17T1/2+(1.1 ± 0.8)× 10–16 cm3 atom–1 s–1, the temperature-independent term lying within the error of the measurements. The mean radiative lifetime (τe) of Mg(3 3P1) has been redetermined from all the decay measurements in the range 600–1100 K, yielding the improved result τe= 2.3 ± 0.3 ms. An approximate estimate of kMg= 2 × 10–15 cm3 atom–1 s–1 is reported for the collisional removal of Mg(3 3PJ) by Mg(3 1S0). Energy pooling to yield Mg(3 1P1) has been studied in the range 800–1100 K, the first-order decay profiles for Mg(3 1P1) and Mg(3 3P1) being consistent with Mg(3 3PJ)+ Mg(3 3PJ) annihilation at all temperatures and pressures. Estimates of the ratio of the initial yields of [Mg(3 1P1)]t= 0/[Mg(3 3P1)]t= 0 determined at different temperatures are found to be sensibly consistent with thermodynamic data for the vapour pressure of atomic Mg. Energy pooling to yield Mg(4 3S1) has been investigated from detailed measurements of the decay profiles for this atomic state using the first-order kinetic approximation at ‘long decay times’ in the range 750–1100 K. This has been interpreted quantitatively in terms of a mechanism involving the low-lying states Mg2(3Πg, 3Σ+u), 2.05 and 2.19 eV above the Mg2(X1Σ+g) ground state, and produced from the three-body recombination of Mg(3 3PJ)+ Mg(3 1S0)+ He, Kr which undergoes subsequent reaction with Mg(3 3PJ) to yield Mg(4 3S1), in accord with the earlier proposal of Breckenridge and coworkers. The mechanism is established from the dependence of the decay profiles at λ(average)= 517.6 nm on the pressure of helium and krypton at all temperatures, and by comparison with those at λ= 457.1 nm. This indicates that Mg2(3Πg, 3Σ+u) can only be placed in stationary state in this type of system when T > 1000 K. The temperature dependence of the initial yields of [Mg(4 3S1)]max/[Mg(3 3P1)]t= 0 is also found to be in sensible accord with expectation based on vapour pressure data for Mg(3 1S0).

Article information

Article type
Paper

J. Chem. Soc., Faraday Trans. 2, 1986,82, 21-39

Kinetic study of Mg(3 3PJ), Mg(3 1P1) and Mg(4 3S1), including energy pooling, following pulsed dye-laser excitation at λ= 457.1 nm [Mg(3 3P1)â†� Mg(3 1S0)]

D. Husain and G. Roberts, J. Chem. Soc., Faraday Trans. 2, 1986, 82, 21 DOI: 10.1039/F29868200021

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements