Issue 11, 1981

Investigations of microemulsions by light scattering and neutron scattering

Abstract

Microemulsions formed from water, xylene, sodium dodecyl benzene sulphonate and hexanol have been investigated by three different scattering techniques, namely, time-average light scattering (l.s.), small-angle neutron scattering (SANS) and photon correlation spectroscopy (p.c.s.). The water volume fraction in this water-in-oil system, which was investigated at a constant molar ratio (hexanol: sodium dodecyl benzene sulphonate) of 3.28, was varied from zero to 0.533. Over most of the volume-fraction range the droplets were strongly interacting. The problem of obtaining information about the variation of particle size with volume fraction from scattering techniques in strongly interacting systems is discussed in some detail and a possible theoretical approach suggested based on the use of a hard-sphere interaction model. The combination of l.s., SANS and p.c.s. is shown to be an excellent one for problems of this type, in that l.s. and SANS can provide time-average structural information and p.c.s. dynamic information about the motion of the particles in strongly interacting systems. With the model proposed the information from the three experimental techniques was found to be self-consistent. For the system investigated the radius of the water core of the droplet was found to increase with increase in the water volume fraction whilst apparently maintaining a constant water–oil interfacial area.

Article information

Article type
Paper

J. Chem. Soc., Faraday Trans. 1, 1981,77, 2585-2612

Investigations of microemulsions by light scattering and neutron scattering

D. J. Cebula, R. H. Ottewill, J. Ralston and P. N. Pusey, J. Chem. Soc., Faraday Trans. 1, 1981, 77, 2585 DOI: 10.1039/F19817702585

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements