Issue 8, 1981

Stability of non-aqueous microgel dispersions in the presence of free polymer

Abstract

A series of cross-linked polystyrene microgel particles have been prepared and characterised in terms of their surface carboxyl-group concentration and their unswollen (in water) and swollen (in ethyl benzene) diameters. From the values for these two diameters the average segment volume fraction in the swollen microgel particles has been calculated (values range from 0.10 to 0.63). The effect on adding homopolymer polystyrene samples covering a wide molecular-weight range (1800 to 2 × 106) has been studied. Critical polymer/solvent volume fractions (ϕ+ps) have been established, at different microgel volume fractions, below which the microgel dispersion is stable, but above which weak, reversible flocculation is observed. For a fixed microgel volume fraction, ϕ+ps decreased with increasing polymer molecular weight. For a given molecular weight, ϕ+ps increased with increasing average segment concentration in the swollen microgel particles. Both of these trends are predicted by the recent theory of Vincent, Luckham and Waite, which analyses the effect of free polymer on the stability of sterically stabilised dispersions. By a suitable choice of the form of the segment concentration distribution in the swollen microgel particles, good agreement between experimental and theoretical ϕ+ps values may be obtained.

Article information

Article type
Paper

J. Chem. Soc., Faraday Trans. 1, 1981,77, 1831-1843

Stability of non-aqueous microgel dispersions in the presence of free polymer

J. Clarke and B. Vincent, J. Chem. Soc., Faraday Trans. 1, 1981, 77, 1831 DOI: 10.1039/F19817701831

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements